page2
General Properties of the decoder
Multiprotocol (Märklin® Digital and DCC systems)
Maximum current: 300mA
Dimensions: L x W x H = 22,0 x 15,0 x 3,0 mm
Operating Modes
Our function decoders are true multi-protocol decoders with automatic operating mode detection. The decoder analyses the track signal and filters out the necessary parts. The deocders has also an analogue operation mode for DC and AC. Changing from digital to analogue and back represents no problem.
Protection
The decoder has an overcurrent protection of 300mA. The inrush current from lamps and capacitive loads at power up is much higher. It may happen that the decoder seems to stop responding. Repowering the device will solve this problem. Please reduce load off the decoder. If the output current is not sufficient, one can use the amplifier module VE100.
Remarks
Read this manual carefully. Damage to the products by not following the instructions voids the warranty to the product. We are not responsable for subsequent damages arising therefrom. This product is not a toy! Not suitable for children under 14 years. By non correct use a risk of injury is possible! Keep this manual in a safe place.
2
FD620Multi – Function Decoder